How to fix blue screen of death error in Windows 11/10

How to fix blue screen of death error in Windows 11/10

Windows 11/10 He also has blue screen of death (blue death) or so screensaver error Which appears when you’re in the middle of something, upgrading the operating system during boot up or just working on your computer. While some are facing the black screen issue, some are facing the blue screen of death issues. We take each scenario and explain what to do in each case.

Windows 10/8 blue screens are simple and do not display stop error information. You may need to force Windows to show the details of the Stop error.

What is the first step to solve a blue screen of exception error

BSOD or stop errors in Windows 11/10 seem to be better, more friendly, and easier on the eyes. But they do not provide many details. You need to force your operating system to show Windows Stop error information.

Common troubleshooting steps to fix blue screen errors in Windows 11/10 that you should follow are:

  1. Check if System Restore can solve this problem.
  2. Run antivirus, antispyware as well as computer junk/registry cleaner.
  3. Run the Windows Check Disk utility.
  4. Check if you have made any changes or modifications to the software or hardware.
  5. In most cases, the software is the victim and not the cause of the BSOD. So do not rule out hardware problems. It could be damaged hard drives, defective physical RAM, overheating of CPU chips, or something else!
  6. Check if you can see the driver name in the error details. If you can, simply disabling, removing, or downgrading this driver may help fix this problem. Network interface cards, disk controllers, and video adapters are some of the most common culprits.
  7. Check your memory. Use the Windows Memory Diagnostic Tool. Go to Control Panel and type “memory” in the search box. Under Administrative Tools, click Diagnose Computer Memory Problems. In the Windows Memory Diagnostic Tool, shown here, select one of the options.
  8. Check the BIOS carefully. Is an update available from the system or motherboard manufacturer? Check the BIOS documentation carefully; Sometimes, resetting all BIOS options to their default settings can fix an issue caused by over-tuning.
  9. Check if you are running out of system resources? Sometimes, a severe shortage of disk space or RAM can cause a BSOD.
  10. Check if the system file is corrupted?
  11. Work in safe mode, where only major drivers and services are enabled. If your system boots into safe mode but not normally, then you probably have a driver issue. Try to run Device Manager in safe mode and uninstall the most likely suspect. Or run System Restore in safe mode.
See also  Culture: The History of Online Shopping

Here are some basic tips to help you fix the blue screen of death in Windows 10 in different scenarios. This guide will help you understand, analyze and troubleshoot Windows blue screen of death, stop errors, error codes, check errors, system crash errors, system crashes, kernel crashes in Windows 10/8/7.

If you need step-by-step instructions, check if the online Blue Screen Troubleshooter for Windows 10 will help you.

Suspension: If you can connect normally, that’s much better; Otherwise, you will need to boot into safe mode, access the advanced boot options screen, or use installation media to boot in order to perform these instructions.

Blue Screen of Death when upgrading to Windows 11/10

While upgrading to Windows 10 from Windows 8.1 or Windows 7, or to Windows 11 from Windows 10, you may encounter a BSOD. Usually this happens due to BIOS settings. In some cases, the cause of the error may be a corrupt installer download.

If you get the blue screen of death during the upgrade, the installer will take you back to the original operating system. From there, you need to run the upgrade installer again. You won’t get stuck with Windows 11/10 half installed. But the installation files will be located on the C: drive that you will need to clean before running the upgrade again. You will need to remove all files from the Software Distribution folder under the Windows folder. You will also need to delete the Windows ~BT folder from your C drive.

After deleting these files, go to BIOS (press DEL while booting) and enable UEFI boot before trying to upgrade again. It would be best to use the installation media provided by Microsoft to perform the upgrade. An in-place upgrade takes a long time and can cause a problem again. Just go to your original operating system. Then run Setup.exe from the installation media you created. This should help you bypass the blue screen of death when upgrading to Windows 11/10.

See also  CD Projekt compra estúdio de desenvolvimento de Vancouver, Digital Scapes

Blue screen of death when starting Windows 11/10

There are two scenarios while running Windows 10. In the first scenario, you access the desktop while in the second, the blue screen of death does not even allow you to access the desktop and you are stuck in a loop of restarting the computer.

The main causes of the appearance of BSOD are:

  1. Some Windows drivers cause conflicts or files
  2. An error occurred with some Windows updates. If the latter is the cause, you should remove and block the update that caused the blue update screen to appear.

If you can get to the desktop, go to Settings, then Windows Updates. Click on Advanced and then View installed updates. Review the history of updates and remove those installed on the date after which the blue screen of death appears. If removing updates solves the problem, prevent the update from reinstalling.

If the problem is with a driver update, you need to see if any drivers were installed recently. The process is the same as above. You will see driver updates in Installed Updates. But after removing the update, I suggest you block automatic driver updates from Microsoft. It is preferable to use a third-party tool that allows you to determine the version of the driver. This way you will play more carefully.

Read: How do I find the driver that is causing the blue screen on Windows?

BSOD restart loop blocking access to desktop

If you are stuck in a blue screen of death restart loop, Windows 11/10 will automatically enter repair mode after a while. From there, use the System Restore function to fix the problem. Click System Restore and select a date/point before you start getting the blue screen of death. System Restore will restore your PC to an earlier time, removing all changes made to your PC by Windows Update. It will not affect your files.

See also  Nossa lista de The Legend of Zelda Remakes, de que também gostamos -

Blue screen of death while working on Windows 11/10

The reasons can again be a Windows update, a device driver update, or recently installed hardware. To confirm that updates are the cause, use the method described above to isolate the problematic update and then block it.

If you recently installed a device, turn off the computer and remove the device. Then start and go to Device Manager (WinKey + Break). If the device is still listed there, uninstall it. Reboot to see if the issue is resolved.

Helpful resource: Checklist for errors or Windows shutdown error codes.

ReadExplanation of the screen of death in purple, brown, yellow, red and green.

Windows 10 blue screen of death

You May Also Like

About the Author: Octávio Florencio

"Evangelista zumbi. Pensador. Criador ávido. Fanático pela internet premiado. Fanático incurável pela web."

Leave a Reply

Your email address will not be published. Required fields are marked *